Friction Modifier for Gas Engines Gasoline MAXIMUM

Description

OLIKS
ALL PRODUCTS
Shipping
SHIPPING POLICY
All items are packed and shipped within 3 business days following cleared payment.
Each item is carefully packed in a waterproof plastic sleeve or box and shipped promptly.
Delivery time may vary with different countries and destinations, and may take longer to reach its final destination due to customs clearance.
Please make sure your PayPal address is accurate, as we will ship to the address provided on PayPal.
Our company operates in Russia. Our
Custom Fees Protection Program
applies to all International transactions. Please see our Customs Fees Protection Program details for more information.
If you have time limits or any other concerns regarding shipping please feel free to contact us any time. We will always be glad to help!
Shipping Policy
by OLIKS
Returns
RETURN POLICY
We offer a 30 days return if the item arrived damaged or its size, measurements or other parameters are not as advertised in the listing. If this happens, then we will ask you to return the item to us and you will then have the option of receiving a full refund or exchange the item. As you prefer!
If you would like to return the item for a size change, we will ask you to cover any additional shipping fees.
If you would like to return the item for any other reason, we charge a 10% restocking fees. Also the initial and return shipping fees will be covered by the buyer.
Return Policy
by OLIKS
Payments
PAYMENT POLICY
Payments to be made within 48 Hours of the end of the auction unless otherwise agreed.
We accept as Payment:
PayPal
(We are a PayPal Verified seller and we prefer PayPal as a method of payment)
Bank Wire Transfer
(If you would like to choose this method of payment, please contact us to get our account information for the Bank Wire Transfer)
Payment Policy
by OLIKS
Customs
CUSTOMS FEES PROTECTION PROGRAM
All items are shipped as a gift with a very low declaration value. Extremely rarely does a package get stopped by the Customs. But if for some reason this happens, we will issue a
FULL REFUND OF CUSTOM DUTIES/FEES
(if they apply)
TO ALL
of our International buyers. So please, do not worry about customs fees as we take all the responsibility and we will cover all the expanses.
“Under only one condition”
You must first contact us, before sending any invoices or documentation to the Customs office. That is all!
Customs Policy
by OLIKS
Warranties
AUTHENTICITY / WARRANTIES
Please purchase with confidence!
Every item we sell is guaranteed to be as advertised & New!
Again all of our items are Authentic and of the highest quality. We do not sale damaged or secondhand products.
Authenticity Policy
by OLIKS
Wholesale
WHOLESALE
We are manufacturer. Our company operates partially as a retailer but our main line of business is worldwide distribution.
We are actively expanding the presence of our Brand in the European and USA markets.
If you are interested in our products as a reseller or you wish to represent our brand in your area, please contact us at any time for more information. We would be pleased to send you our catalogue including the price list.
We are open for cooperation!
Thank you!
Wholesale Policy
by OLIKS
Category1
Category2
Category3
Category4
Category5
Category6
Friction Modifier for Gas Engines Gasoline MAXIMUM
Friction modifier MAXIMUM GASOLINE (hereinafter MT) Olix Maximum Gasoline is intended for processing
gasoline and gas engines (except for engines with alumina and nikosilovy
coatings) of cars and small trucks in the process of regular
exploitation.
Application effects
Increase and leveling of compression on the internal combustion engine cylinders (due to compensation
wear in the interface between the cylinder liner and the compression ring).
Reducing oil consumption for waste (by reducing the gaps in the mates
cylinder-piston group and reducing the breakthrough of crankcase gases into the breather).
Increase of the overhaul life of units and mechanisms by two or more times
(due to the formation on the surfaces of friction pairs of metal-ceramic
protective layer, hereinafter MKZS, with surface hardness exceeding
original hardness of the factory part).
An increase in the power of the internal combustion engine (by compensating for the wear and
mechanical losses due to friction).
Increase in the resource of oils (by reducing the temperature load
on lubricating oil in friction pairs, due to abnormally low roughness
formed ICPP).
Reduction of noise and vibration during ICE operation (due to pressure equalization
combustion through the cylinders of the internal combustion engine, and reducing the gaps in the engine mates).
Reduction of electrochemical corrosion processes.
Reduction of harmful emissions from internal combustion engines (by increasing the completeness of fuel combustion).
ICE protection in case of emergency loss of pressure in the lubrication system.
Improved engine start at low temperatures.
Instructions for use
Dosage regimen
Oil system volume
up to 4 l - 1 bottle
4-8 l - 2 bottles
8-12 l - 3 bottles
ATTENTION!
Engines with obvious mechanical failures cannot be processed
and mechanical wear over 50% of the initial.
If the oil contains active Teflon, molybdenum
or other additives, the engine must be thoroughly rinsed before processing
and replace with oil without the specified additives.
Before starting treatment, check that there are no oil leaks in the engine.
and that the quantity and quality of the oil are in accordance with the recommendations
engine manufacturer.
Do not use with engine oils containing molybdenum and Teflon.
additives.
After using MT Olix, it is recommended to reapply it
every 50,000 km.
Processing technique
1. Treatment with MT Olix is carried out with a regular oil change with replacement
oil filter.
2. Before adding MT Olix, make sure that there is sediment at the bottom of the bottle and
shake vigorously until the precipitate is completely dissolved.
3. With the engine warmed up to operating temperature, pour into the crankcase through
oil filler neck 1/3 of the required amount of MT Olix. Start
engine and run at idle speed for 15 minutes. Switch off the engine.
4. Pour 1/2 of the remaining amount of MT Olix into the crankcase. Start engine
and work at 1200-1400 rpm for 15 minutes. Switch off the engine.
5. Pour the remaining amount of MT Olix into the crankcase. Start the engine and work in
mode 1600-1800 rpm for 15 minutes.
6. Without turning off the engine, drive the car for 20-30 km at engine speed
not above average.
7. Processing is completed, the full effect will be noticeable after 300 - 500 km.
Notes:
Before using MT Olix, it is recommended to de-carbonate the CPG and make
flushing the engine to remove residual contamination of the inner surface
oil system.
Not recommended for use in case of mechanical damage to parts and assemblies.
MT Olix is compatible with any type of engine oils and does not change their properties.
To achieve a full level of vehicle protection, it is recommended that all
nodes and mechanisms of transmission and power steering.
Frequency of application
Seller's Other Items
Friction Modifier for Manual Transmission Mechanical Boxes Olix
Take a look
Friction Modifier for Processing Pump Olix
Take a look
Friction Modifier for Gas Engines Gasoline MAXIMUM
Take a look
ALL PRODUCTS
Seller's Other Items
Friction Modifier for Diesel Trucks Olix MEGA DIESEL
Take a look
Friction Modifier for Any Automatic Transmission Olix
Take a look
Friction Modifier for Any Manual Transmission Olix
Take a look
About us
Friction modifier OLIX used for processing engines and transmission units, both motor transport and other types of transport.
The effectiveness and technology of product application were carried out with the participation of the ZABNII of Complex Research of the Siberian Branch of the Russian Academy of Sciences, the Chita Institute of Natural Resources of the Siberian Branch of the Russian Academy of Sciences, a number of Research Institute of Russian Railways and a number of universities in China, Finland and Japan.
Our policies
Shipping
SHIPPING POLICY
All items are packed and shipped within 3 business day following cleared payment.
Each item is carefully packed in a waterproof plastic sleeve or box and shipped promptly.
Delivery time may vary with different countries and destinations, and may take longer to reach its final destination dueto customs clearance.
Please make sure your PayPal address is accurate, as we will ship to the address provided on PayPal.
Our company operates in Russia. Our
Custom Fees Protection Program
applies to all International transactions. Please see our Customs Fees Protection Program details for more information.
If you have time limits or any other concerns regarding shipping please feel free to contact us any time. We will always be glad to help!
Shipping Policy
by OLIKS
Returns
RETURN POLICY
We offer a 30 days return if the item arrived damaged or its size, measurements or other parameters are not as advertised in the listing. If this happens, then we will ask you to return the item to us and you will then have the option of receiving a full refund or exchange the item. As you prefer!
If you would like to return the item for a size change, we will ask you to cover any additional shipping fees.
If you would like to return the item for any other reason, we charge a 10% restocking fees. Also the initial and return shipping fees will be covered by the buyer.
Return Policy
by OLIKS
Payments
PAYMENT POLICY
Payments to be made within 48 Hours of the end of the auction unless otherwise agreed.
We accept as Payment:
PayPal
(We are a PayPal Verified seller and we prefer PayPal as a method of payment)
Bank Wire Transfer
(If you would like to choose this method of payment, please contact us to get our account information for the Bank Wire Transfer)
Payment Policy
by OLIKS
Customs
CUSTOMS FEES PROTECTION PROGRAM
All items are shipped as a gift with a very low declaration value. Extremely rarely does a package get stopped by the Customs. But if for some reason this happens, we will issue a
FULL REFUND OF CUSTOM DUTIES/FEES
(if they apply)
TO ALL
of our International buyers. So please, do not worry about customs fees as we take all the responsibility and we will cover all the expenses.
“Under only one condition”
You must first contact us, before sending any invoices or documentation to the Customs office. That is all!
Customs Policy
by OLIKS
Warranties
AUTHENTICITY / WARRANTIES
Please purchase with confidence!
Every item we sell is guaranteed to be as advertised & New!
Again all of our items are Authentic and of the highest quality. We do not sale damaged or secondhand products.
Authenticity Policy
by OLIKS
Wholesale
WHOLESALE
We are manufacturer. Our company operates partially as a retailer but our main line of business is worldwide distribution.
We are actively expanding the presence of our Brand in the European and USA markets.
If you are interested in our products as a reseller or you wish to represent our brand in your area, please contact us at any time for more information. We would be pleased to send you our catalogue including the price list.
We are open for cooperation!
Thank you!
Wholesale Policy
by OLIKS
Paymant system:
MONEY BACK GUARANTEE
Copyright by OLIKS Inc.
Powered by
Expand Solutions