KFI Winch Mount Kit Polaris RZR XP 900 and 4 2011-2014

Description

Brand New "KFI" Winch Mount for the following Polaris RZR's:
RZR MODEL
YEARS
900 RZR XP
2011-14
900 RZR XP 4
**
2012-14
** = Requires the purchase of
10-0119
(wire extension kit) Due to location of battery on the RZR.
Mount designed to work with the following winches:
KFI:
ST17 / A2000 / A2500-R2 / A3000 / U45-R2 / SE25 / SE35 / SE45-R2 / AS-50
WARN:
VRX 25 / VRX 25-S / VRX 35 / VRX 35-S
WARN:
A2000 / A2500 / U2500 / 1.5ci / 2.5ci / 2.5ce / 3.0ci / 3.0ce / 3.0s
WARN:
RT15 / RT25 / RT30 / XT15 / XT25 / XT30
WARN:
Vantage 2000-3000lbs / Provantage 2500-3500lbs
RAMSEY :
ATV2500 / ATV3000
SUPERWINCH :
Terra25 / Terra35 / A3500 / LT2500 / LT3000 / LT4000ATV
MILE MARKER :
PE2.5 / PE 3.5 / VMX2.5 / PE3500
CYCLE COUNTRY :
Work Power  2500 / Powermax 2500 and 3500
KEEPER CORP. TRAKKER:
KT2500 / KT3000 / KT2500C / KT3000C
KEEPER CORP. TRAKKER:
KT2000
Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
Will require the additional purchase of the Converter Mount #
100480
SMITTYBILT :
XRC 2.0
Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
Will require the additional purchase of the Converter Mount #
100480
SMITTYBILT :
XRC 3.0 / XRC 4.0
XGEAR:
X3000 / X4000
4-Hole Standard (3.00" x 4.875" bolt pattern)
VENOM:
2000 / 2500 / 3000 / 3500 (Hardcore Series)
All with 3.00" x 4.875" bolt pattern mount-up.
VENOM:
4500 / 5000 (Hardcore Series)
Will require the additional #101065 Spacer Plate
All with 3.00" x 4.875" bolt pattern mount-up.
QUADBOSS:
RP25 / RP35
Possibly many others with the below standard mounting patterns, call to confirm.
4-Hole (3.00" x 4.875" bolt pattern with rollers that are 4.875" bolt pattern)
2-HOLE MOUNTED WINCHES WITH A 3.10" BOLT PATTERN:
All 2-Hole mounted winches will require the additional purchase of the Converter Mount #
100480
Requires roller fairlead with a 4.875" bolt pattern; available if needed #ATV-RF.
This mount has the Wide Bolt Pattern built in but is not recommended due to cable rub on the mount.
4-Hole (3.00" x 6.60" bolt pattern with rollers that are 6.00" bolt pattern)
Specifications:
​​​​​​​
100% MADE IN USA.
Constructed of 3/16" steel.
Unlike all other mount competitors, our mounts are metal bead blasted before they are powder coated for the best possible finish prep.
Powder coated black for supreme durability.
Complete installation instructions included.
All mounting hardware included.
Satisfaction guaranteed.
Roller fairlead and winch
not
included.